How to thread a bobbin pfaff hobby

Bobbin casing with the big gap to the left. Drop the bobbin in and slip the thread into the slit. Hold the little latch open as you pop it back in. It should look like this. Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on.

Place the thread clockwise into the bobbin winder tension (1) and run it to the bobbin. There the thread is passed through a hole and held tight. Let go of the thread after a few revolutions. Raise pins and place a spool of thread on one of them. Pass the thread from the spooi around bobbin tension stud , wind it around the bobbin a few times and push the bobbin to the right for winding.

Complete manual is available: Sewusa wishes you lots of luck with your machine! Threading the Needle Thread. Place the bobbin in the bobbin holder with the thread running off as shown in the picture. Pull the thread into the front notch ( A ) on the front side of the bobbin holder. Just visit the Accesorries Page and select your machine from the works with drop down list, then select Bobbins from the Type Category and then the website will show you all the accessorries that will work with your machine.

This manual comes under the category Sewing machines and has been rated by people with an average of a 7. This manual is available in the following languages: English, Dutch, German, French. Below you can view and download the PDF manual for free. There are also frequently asked questions, a product rating and feedback from users to enable you to optimally use your product. Pfaff hobby 7Sewing Machine.

Free Shipping On Orders $29. Most Orders Delivered Within 2-Business Days. Page nserting the bobbin case In Insert the bobbin into the bobbin through the slit A , doing so, pull the thread it lies in B until then under the tension plate the opening (see arrow).

SMARTER by PFAFF 260c Insert the Bobbin. Wind a new bobbin and insert it in the case. The bobbin case should drop down just a bit.

Use a screwdriver to turn the screw on the case a little to the left to loosen the tension. They overlap in a specific sequence. Rotate the spool holder into the sewing position. Grab the cover from the top between your thumbs and fingers, one hand at each end.

Lift the thread holder straight up to remove it. It takes a while to get the tension settings right but once you figure that out, she does well. Shop A Variety of Quality Bobbins From Brands Like Janome, Juki, Brother, And More. Video with pro comments help you learn how to thread your sewing machine correctly. How to thread a bobbin.

Start threading your sewing machine with winding a bobbin. Loop the thread from back to front under the disc and pull the thread back to the right in front of the spool of thread. Place a spool of thread on special spool pin.

If the bobbin case drops quickly inches or more, the tension is too loose. Symptoms involve clicking, getting stuck, etc. Bobbins are expensive compared to using thread from a spool.

Using them comes depends on how you value your time. Next, take the end of the thread and insert it through one of the holes in your bobbin. Then, wrap the thread around the bobbin a few times to secure it. Keep in mind that there are also pre-threaded bobbins available in craft stores if you do not wish to thread your own bobbins. I love this machine, it has great stitches, and I love having so many needle positions.

I have just finished a full bobbin of thread , and the low bobbin indicator did not come on. I am using the needle that came in the machine and the same cone thread that I use on my serger, not expensive but it is 1 cotton and I too use the same thread in the bobbin as on top.