How to connect monitor controller to audio interface

To get the best out of the studio monitors , they also need to be positioned correctly inside the studio relative to the location of the audio interface and of the main listener. You connect the output of the audio interface to the input of the keyboard. The midi keyboard is giving commands. Those commands are leaving the keyboard via the output.

The audio interface has to receive the commands. A monitor controller is perfect for anyone who’s looking to expand their monitoring ability. If your current audio interface doesn’t have the ability to switch between speakers or doesn’t feature vital controls such as dim and cut then a monitor controller is the perfect addition to your setup. How do you connect studio monitors? What is a studio monitor controller?

What type of cable is used to connect studio monitors? The Audient looks tempting, the Crimson is a bit more comfortable to operate due to its size. I own the Crimson since years and it is very very goo esp. More Than meets the eye. I did this because I also have FL Studio and Reason 4. Connect the monitors from there.

In other words speakers that have an amp built in and a power switch and volume controls? If so, you can connect these directly to the output of the mixer - no preamp needed. In this article, we are going to the solution for this and that is the studio monitor controller. Choosing a professional quality studio monitor controller.

For a higher quality, more professional interface with far more features, check out the SPL Crimson High Performance Studio Monitor Controller. You get all the audio outlets you nee including USB ports. Although it’s on the more expensive side, you get what you pay for in the build. On desktop PCs, this port is typically on the back of the CPU box, while iMacs have a 3. Some common audio -out methods include the following: Optical - A pentagonal port. Optical cables will usually work with high-en modern speakers.

You may need to connect the control module to the output and the sub to it. For NI audio interfaces , you can follow the instructions given in this article. If your soundcard is being connected for the first time, you will see a panel with the layout of the audio interface describing the sound output setup. Make sure your monitor speakers are switched off before connecting the audio cables between your speakers and audio interface.

If your interface has a volume dial, make sure this is turned down to the minimum. If you want to make a good quality recording of your voice or any instrument and hear the so that you can mix and master your recordings, you will need an audio interface. To make sure an audio device is connecting correctly, check the compatibility and drivers , sleep settings , connections , and the startup sequence. This article explains how to connect your subwoofer to your Focusrite interface in order to use it alongside a pair of monitor speakers to listen or mix stereo audio.

The user guides for some of our larger interfaces will instruct you on how to set up in 2. Play music from eitheror Begin to slowly turn up the amp to a level a bit louder than the highest level you would ever monitor and mix at. Play some music and turn the volume level of your computer audio player to some reasonable volume. The BX5a should be playing the music. This method is much simpler make sure you have: a. Visit Behringer’s Audio Interface page and select your product. Click the Downloads tab and scroll down to Drivers.

Open your Downloads folder, extract the. Restart your computer after. Most users control their monitors with the built-in facilities in their audio interfaces , however, some of us use dedicated units. Read on to find out what we use to control our studio monitors.

Mackie Studio Bundle Record Like a Pro.